Green CCTV using Renewable Energy

From CCTV Information
Jump to: navigation, search
Ecovision-logo-main.jpg

Self powered camera products

ecovision are market leaders in providing a full range of wind and/or solar powered camera based system products for remote open areas. Designed for use where mains power is unavailable, too costly or not possible. The product range are available in a specially designed pole or mobile trailer mounted system and come complete with everything required to get the camera up and running back to the control room, including pole, camera(s), housing, internal cabling, codec(s), transmission Rx/Tx, specially calculated wind/solar kit depending on which product or options selected, etc. The products can be stand alone or integrate into any existing CCTV scheme and each ecovision product is available in a number of transmission options including Fibre or Cat5/6, Wireless over IP, Digital RF, 3G or satellite.


Benefits

Ecovision-1.jpg

Saving thousand of pounds in unnecessary civil engineering and electrical costs, increasing security and lowering carbon footprint is an area in which ecovision specialise and have great success. Our Intelligent cctv provides images in evidential quality, 24 hours a day all year round powered only by natural resources of wind and/or solar energy.

Save money, improve security, view areas not normally possible and lower the carbon impact on the environment with ecovision - greener cameras, clearer picture.

Benefits:

  • Stand alone. No ducting or electrical cabling required.
  • Totally self powered
  • Very minimal maintenance
  • Various Wireless Link options on each product, including IP, Digital RF, 3G, Satellite.
  • Integrates seemlessly into any CCTV scheme
  • Saves thousands or tens of thousands in civil
Ecovision-2.jpg

Important Notes on Renewable Energy: Each product works 24/7 all year round, even in mission critical applications thanks to a series of accurate calculations carried out by ecovision, without these pre-calculations the systems would fail at some stage throughout the year. The complete ecovision product range is designed to be easy to install by anyone with basic CCTV experience, no knowledge or experience in renewable energy systems is needed since this is all taken care of. The products have slight variations in renewable energy kits depending the global position they are installed.

Ecovision - greener cameras, clearer picture.


Product Range

P-Series

Ecovision-3.jpg

PTZ range of products.

P1 Heavy Duty PTZ system. Available in a number of transmission options including fibre, wireless over IP, digital RF, 3G or satellite.

P2, P3(IR) & P4(Thermal) Coming Soon.

F-Series

A range of fixed view camera products, with analogue IP or High Definition variants in single or multiple camera product versions.


F-S Range

Ecovision-5.jpg

Fixed-view Standard Day/Night camera variant, available in single or multiple camera versions. For areas that are well lit or have some ambient lighting.

F-S1 A single fixed view Standard Day/Night camera

F-S2 As F-S1 but with 2x Standard Day/Night cameras

F-S3 As F-S1 but with 3x Standard Day/Night cameras F-S4 As F-S1 but with 4x Standard Day/Night cameras

F-L Range

Ecovision-6.jpg

Fixed-view LoLux camera variant, available in single or multiple camera versions. For areas with little or no light. This camera does not use frame integration or slow shutter, yet still achieves real-time no-blur images due to a special chassis and chip.

F-L1 A single fixed view Standard Day/Night camera.

F-L2 As F-S1 but with 2x Standard Day/Night cameras

F-L3 As F-S1 but with 3x Standard Day/Night cameras

F-H Range

Ecovision-7.jpg

Fixed-view High Definition IP camera variant, available in single or multiple camera versions. For areas with some lighting, but requires pin sharp detail in high definition. Minimum 5 mega pixel resolution (approx 16.4 times better resolution than a standard analogue camera).

F-H1 A single fixed view Standard Day/Night camera.

F-H2 As F-S1 but with 2x Standard Day/Night cameras

F-H3 As F-S1 but with 3x Standard Day/Night cameras

F-H4 As F-S1 but with 4x Standard Day/Night cameras

F-W Range

Fixed-view High Definition Web camera variant, available in Dual or 2x Dual camera versions. For areas with some lighting, but requires pin sharp detail in high definition. Minimum 3.1 mega pixel resolution (approx 10 times better resolution than a standard analogue camera).

F-W2 A dual fixed view camera version with built in features. The Dual HD camera is a single module which has 2 cameras built in e.g. one close up view and one overview. Auto FTP Hi Definition Still shots to an FTP server or website, email capability, alarm images, built in recording, and many more.

F-W4 As F-Web 2 but with 2x Dual HD Web Cameras making up 4 camera product.


Please contact us to discuss your individual needs or with any system questions.